|
Navigators Footrest £15 |
|---|---|
 |
Professional Navigators Footrest £35 |
 |
Stainless Steel Bonnet Pin Kit (Sleeve type) £7.50 |
 |
Aluminium Bonnet Pin Kit (Sleeve type) Available in Red Blue or Gold |
 |
Bonnet Pin Cups These cups allow bonnet pins to be recessed below the bonnet line. (Bonnet pins not included) £9.50 pair |
 |
Stainless Steel Boot Spring Kit £7.00 |
 |
Coloured Roll Cage Padding Closed cell, does not absorb moisture, Split with offset I.D. (thicker padding towards driver!), Suits 1 1/2" to 2 1/2" diameter roll bar. £7.60 each |
 |
6 ft Competetion Pull Cable £7.80 |
|
12 ft Competition Pull Cable £9.50 |
Alloy mudflap brackets £3 each |
|
New rally regulations state that all vehicles must have a full set of mudflaps fitted! Order now! |
Kaylan Universal Mudflaps Highly durable, low cost, professional quality mudflaps. Supplied in pairs, or as a set of four. £16 per pair OR £31 set of 4 |
 |
Adjustable Spot Lamp Steady Bars Made with left and right hand threads so they can be adjusted for tightness after fitting. Helps stop lamp vibration, and also suitable for fitting and adjusting front spoilers and splitters. £12 pair |
 |
F.I.A Battery Master Cut Off Switch Isolates engine and protects alternator circuit against heavy voltage surge and prevents engine 'run-on'. (Controls circuits up to 500 amps initial load with 100 amps continuous load 12 - 24v) £22.00 |
Scruitineer Sticker Sheet: A must for all competition cars £2.00 each |
|
 |
Standard Eyebolt: 23mm thread length (7/16” UNF thread) £1.60 each |
 |
Long Eyebolt: 32mm thread length (7/16” UNF thread) £2.00 each |
 |
Eyebolt Backing Plate : 50mm x 25mm x 6mm (7/16” UNF thread) £1.00 each |
 |
Large (FIA) Eyebolt Backing Plate : 65mm x 65mm x 3mm plate, with welded nut (7/16” UNF thread) £1.70 each |
 |
Telescopic Wheel Brace – Extends from 33cm to 53cm for extra torque. Fits 17mm, 19mm, 21mm, 23mm (Hex Head nuts/bolts) Ideal for Race or Rally: £10 |
 |
Fold Down 4 Way wheel Brace/Spider - for easy storage. Fits 17mm, 19mm, 21mm, 23mm (Hex Head nuts/bolts) Ideal for Race or Rally: £11 |
Wheel Conversion Studs: Zinc Plated (Screw in) to suit all Vauxhall & Ford applications: |
|
 |
12mm x 1.5 - 60mm long (complete length of stud) £1.25 each |
|
12mm x 1.5 - 80mm long (complete length of stud) £1.25 each |
|
12mm x 1.5 to 1.25 - 60mm long (complete length of stud) £1.25 each |
|
12mm x 1.5 to 1.25 - 80mm long (complete length of stud) £1.25 each |
|
12mm x 1.5 to 1.25 - 100mm long (complete length of stud) £1.50 each |
Wheel Nuts: Open Ended, Zinc plated: |
|
 |
12mm x 1.5 - 60 degree (19mm/¾” Hex Head) £1.50 each |
|
12mm x 1.25 - 60 degree (19mm/¾” Hex Head) £1.50 each |
Replacement Wheel Studs: Vauxhall/Opel (Need to drill hubs to 14mm to lake larger spline): |
|
 |
12mm x 1.5. Standard plus 13mm – (51mm long) £1.50 each |
|
12mm x 1.5. Standard plus 25mm – (63mm long) £1.50 each |
Aluminium Competition Wheel Nuts: Manufactured from high tensile aluminium, heat treated to specification 7075. These wheel nuts are half the weight of comparable standard wheel nuts with equal strength. They give your alloy wheels the professional finish: Available in either Blue, Red, or Gold – Please specify Open or Closed Ends when ordering and enter the amount required. |
|
 |
12mm x 1.5 - £3.00 each |
|
12mm x 1.25 - £3.00 each |
 |
Valve Caps: Manufactured in aluminium and anodised in four colours: Red, Blue, Gold and Silver. Designed to give your alloy wheel that professional finish. Set of four - £5.00 |
 |
Locking wheel Nuts – For Nova & Corsa: £17 (Available for a wide range of other Vehicles) |
|
|
